Balsa Stripper

Balsa Stripper
Balsa StripperBalsa StripperBalsa Stripper
Our Price:  €13.95
(Inc. 23% VAT)Earn 13 Loyalty Points
  (1 Review)



No stock, delayed despatch

SKU:  607370624005-MA.AXBALSASTR
Brand:  Green Stuff World

This stripper has been engineered to accurately cut balsa sheets and many other materials such as foamed pvc, plastics, cork, foams, etc.. up to 1/4" (6mm) thick into strips up to 1/2" (12mm) wide. This design has a lead screw with 32 threads per inch so that each turn of the wheel will move the blade 1/32 of an inch (0.8 mm). Starting with the blade in the initial position, four turns will produce a perfect 1/8" (3mm) strip.

The blade furnished is the Type 11 used in modeling knives so they are replaceable. To install or replace the blade, loosen the retaining screws and slip a blade between the retainer and the slide. Place on a smooth Surface and with the blade nearly vertical, tighten the screws. Note that the stripper can be set up for left or right handed use. Stripping is best done on a smooth surface. Draw the stripper toward you along the edge of the material to cut.

This set is including:

1x Stripper tool
1x hobby blade
Average Rating (1 Review):  
Write a Review and share your opinions!

Way better than I thought
23 August 2021  | 

I opened it up and saw a tiny little sliding cutting device, thinking I'd been scammed.

But this thing is so bloody handy that cutting page-sized plasticard up takes second now and is measured perfectly every single time.

I just picked this up on a whim, but if you're working with a lot of plasticard this thing is practically mandatory! You will need some kind of angled straight edge to use this though.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Related Products
Paint Remover, 240ml




Hobby Mad