BSI Insta-Cure Super Thin CA Glue (2 oz)

BSI Insta-Cure Super Thin CA Glue (2 oz)
  Zoom
Our Price:  €12.95
(Inc. 23% VAT)Earn 12 Loyalty Points

Availability:  

  

No stock, delayed despatch



SKU:  BSI103
Brand:  Bob Smith Industries

Insta-Cure has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

Warning: Eye irritant. Bonds skin in seconds. If eye contact occurs, flush with water only and get medical attention. If skin bonding occurs, peel, don't pull; soak in UN-CURE or acetone if necessary. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.

CA GLUES:
DANGER: Eye irritant. Bonds skin in seconds. If eye contact occurs, flush with water only and get medical attention. If skin bonding occurs: PEEL, don't pull. If necessary, soak in BSI UN-CURE or acetone (found in most nail polish removers). Wear eye protection / face protection. May cause drowsiness and dizziness. Use in well ventilated area. Keep tightly closed. CA glues chemically react with cotton or wool to generate enough heat to start a fire - do not use with cotton or wool balls or earbuds. KEEP AWAY FROM CHILDREN.

Be the first to Write a Review for this item!

Hobby Mad