BSI Insta-Set CA Accelerator Activator (2 oz)

BSI Insta-Set CA Accelerator Activator (2 oz)
Our Price:  €7.95
(Inc. 23% VAT)Earn 7 Loyalty Points
  (2 Reviews)



In stock, immediate despatch


SKU:  BSI151
Brand:  Bob Smith Industries

INSTA-SET is a catalyst which acts as an accelerator that allows cyanoacrylate (CA) glues to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joints strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Warning: Extremely Flammable. Causes skin irritation. Causes eye irritation. This product is harmful if swallowed. Wear suitable protective clothing. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.

DANGER: Flammable liquid and vapor. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. Store in a cool place away from direct sunlight. Causes serious eye irritation. Wear eye protection / face protection. May cause drowsiness and dizziness. Use in well ventilated area. Keep tightly closed. Avoid release to the environment. KEEP AWAY FROM CHILDREN.

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Good product
05 October 2022  | 

Very good product very fine mist spray thats sets glue instantly plus shipping is very fast

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Super stuff
27 March 2021  | 

I wished i had this handy product earlier, super stuff to fix things instinally, especially PE parts, and if you have gap in the kit and just press it together and put a drop of CA glue and then just a touch of this product and you don't need to hold the pieces together for minutes to glue together.
The only down side is the spray, very messy, i just take a drop in bottle cap and use it with tooth pick,
Highly recommended

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Hobby Mad