PROPERTIES
liquid
crystal-clear
fast drying
temporarily adjustable
does not wrinkle paper
SUITABLE FOR:
Universal - glues wood, wood based materials, plastics (ABS, hard and soft PVC, Plexiglas®, polystyrene, Resopal®), metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper, many plastics and much more.
Working conditions
Do not use at temperatures below +5°C.
Surface requirements
Materials to be glued must be clean, dry and free of dust and grease.
Preliminary surface treatment
When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first.
Directions for use
Apply the adhesive thinly to one side of the assembly, press the parts together - that's it! For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together.
Points of attention
Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.
AFTER USE:
Stains/residue
Remove wet glue stains immediately. Dried glue residue and glue stains in clothing can be removed with acetone.
Storage conditions
Store in a dry, cool and frost-free place.
CAUTION: Highly flammable liquid and vapour. Keep away from heat and sources of ignition. No smoking. Use with good ventilation and avoid breathing vapours. May cause drowsiness or dizziness. If medical advice is needed, have packaging at hand. Dispose of in accordance with local regulations. KEEP OUT OF REACH OF CHILDREN AND PETS.
