BSI Un-Cure CA Debonder (1 oz)

BSI Un-Cure CA Debonder (1 oz)
  Zoom
Our Price:  €4.95
(Inc. 23% VAT)Earn 4 Loyalty Points
  (1 Review)

Availability:  

  

In stock, immediate despatch

+


SKU:  BSI161
Brand:  Bob Smith Industries

UN-CURE debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option.

Warning: Eye and respiratory irritant. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.

SOLVENTS:
DANGER: Flammable liquid and vapor. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. Store in a cool place away from direct sunlight. Causes serious eye irritation. Wear eye protection / face protection. May cause drowsiness and dizziness. Use in well ventilated area. Keep tightly closed. Avoid release to the environment. KEEP AWAY FROM CHILDREN.

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
BSI Un-Cure CA Debonder (1 oz)
Monday, 25 January 2021  | 

A handy product to keep on your work bench. I accidently got some superglue on to my glasses, and the BSI debonder softened and removed the glue in no time. Highly recommended.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Hobby Mad